excel cannot complete this task with available resources 2010

The files are saved on a network drive and I am able to open them fine on my PC which is the exact same spec and setup. I have deleted the files in C:\Users\xxx\AppData\Local\Microsoft\Office\15.0\OfficeFileCache and rebooted the PC but the error still appears. It is happening to all sheets, no matter their size or content, most don't have macros.

http://www.sevenforums.com/microsoft-office/217074-excel-2010-out-memory-not-enough-resources.html

How to Fix the "Bootmgr is missing" Error in Windows

Boot your computer to the Windows 7 DVD (or to a "Repair CD"). At this screen choose to install now.

2. Select your language and click next.

3. Click the button for "Use recovery tools".

4. Then select "Command Prompt".

5. When open, the command prompt will look like this:

6. The command we will use, bootsect.exe, is in a folder (named boot) on the DVD.

We need to know what drive letter has been assigned the DVD drive to access the folder.

Code:

Type: diskpart
and press Enter
 
Type: select disk 0 (zero)
and press Enter
 
type: list volume
and press Enter

In this screen shot, the 7 DVD is letter: G

7. Use your DVD drive letter and

Code:

Type: exit
and press Enter
 
to close Diskpart
 
Type: G: (use the letter of your DVD drive)
and press Enter
 
Type: cd boot
and press Enter
 
Type: dir
and press Enter

to verify that bootcect.exe is there (if you really need to)

8. To restore the "bootsector code":

Code:

TYPE: bootsect /nt60 SYS /mbr
and press Enter

NOTE: If this method fails to restore the MBR, you can try the bootrec command as it is also a tool for repairing the MBR.

9. When completed successfully,

Code:

Type: exit
and press Enter

This will close the command prompt window.

10. Now select Shut Down or Restart

11. Then you can reboot your computer into Windows.
 http://www.sevenforums.com/tutorials/104341-bootmgr-missing-fix.html

The Auto-Complete list doesn’t remember names or email addresses

The Auto-Complete List is a feature which displays suggestions for names and email addresses as you start to type them. These suggestions are possible matches from a list of names and email addresses from the email messages that you have sent.

If names and email addresses that you enter aren’t saved to the Auto-Complete list, do the following:

Microsoft Exchange Server accounts

1. Prepare Outlook to run without Cached Exchange Mode.
1. Click the File tab, and then click Account Settings.
2. Click Account Settings.
3. Click your Microsoft Exchange Server account, and then click Change.
4. Clear the Use Cached Exchange Mode check box, click Next, and then click Finish.
5. On the Account Settings dialog box, click Close.
2. Exit Outlook.
3. Open the %LOCALAPPDATA%\Microsoft\Outlook folder.

• Click Start, and then enter %LOCALAPPDATA%\Microsoft\Outlook in the Search program and files or Start Search box. You can also copy and paste the location into Windows Explorer address bar.

4. Right-click the RoamCache folder, click Rename, and change the folder name to old_RoamCache.
5. Start Outlook.
6. Turn on Cached Exchange Mode.
1. Click the File tab, and then click Account Settings.
2. Click Account Settings.
3. Click your Microsoft Exchange Server account, and then click Change.
4. Select the Use Cached Exchange Mode check box, click Next, and then click Finish.
5. On the Account Settings dialog box, click Close.
7. Exit and then restart Outlook.

Names or email addresses that are entered in the To, Cc, or Bcc boxes should be remembered after each message is sent. Those names and addresses are available as a suggestion the next time that you compose a message.
Top of Page

All other email accounts

1. Exit Outlook.
2. Open the %LOCALAPPDATA%\Microsoft\Outlook folder.

• Click Start, and then enter %LOCALAPPDATA%\Microsoft\Outlook in the Search program and files or Start Search box. You can also copy and paste the location into Windows Explorer address bar.

3. Right-click the RoamCache folder, click Rename, and change the folder name to old_RoamCache.
4. Start Outlook.

Names or email addresses that are entered in the To, Cc, or Bcc boxes should be remembered after each message is sent. Those names and addresses are available as a suggestion the next time that you compose a message.

http://office.microsoft.com/en-in/outlook-help/the-auto-complete-list-doesnt-remember-names-or-email-addresses-HA102534585.aspx?CTT=3
 

exchange administration center 2013 http 500 error

https://SERVER-FQDN/ecp?ExchClientVer=15

If you're installing on Windows Server 2012, please make sure that you've installed the Windows Identity Foundation Windows feature on all Exchange 2013 Preview servers. If it's not installed, install it and then reboot the server.

If you're installing on Windows Server 2008R2 SP1, install the Windows Identity Foundation package from here -http://support.microsoft.com/?kbid=974405.

Can you check the eventvwr and check for the errors there ?

2nd reset the IIS.

3rd. YOU can reboot the box and then give a try .

4th check for http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/54e5f450-2d3e-41af-b70b-27f6670a4b98/#b508ab57-2f57-4881-86aa-0f8e215e1232

http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/945fedae-8e47-4dd6-9d42-b82cd51a6901/

Exchange 2013 Prerequisites

The prerequisites that are needed to install Exchange 2013 on a Windows Server 2008 R2 SP1 computer depends on which Exchange roles you want to install. Read the section below that matches the roles you want to install.

Mailbox server role or combined Mailbox and Client Access server roles

---

Follow the instructions in this section to install the prerequisites on Windows Server 2008 R2 SP1 computers where you want to do one of the following:

• Install only the Mailbox server role on a computer.
• Install both the Mailbox and Client Access server roles on the same computer.

Do the following to install the required Windows roles and features:

1. Open Windows PowerShell.
2. Run the following command to load the Server Manager module.
   
   Import-Module ServerManager
   

3. Run the following command to install the required Windows components.
   
   Add-WindowsFeature Desktop-Experience, NET-Framework, NET-HTTP-Activation, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Web-Server, WAS-Process-Model, Web-Asp-Net, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI
   

After you've installed the operating system roles and features, install the following software in the order shown:

1. Microsoft .NET Framework 4.5
2. Windows Management Framework 3.0
3. Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit
4. Microsoft Office 2010 Filter Pack 64 bit
5. Microsoft Office 2010 Filter Pack SP1 64 bit
6. Microsoft Knowledge Base article KB974405 (Windows Identity Foundation)
7. Knowledge Base article KB2619234 (Enable the Association Cookie/GUID that is used by RPC over HTTP to also be used at the RPC layer in Windows 7 and in Windows Server 2008 R2)
8. Knowledge Base article KB2533623 (Insecure library loading could allow remote code execution) 
9.  
10.  http://technet.microsoft.com/en-us/library/bb691354.aspx 
11. 
    

How to configure Lync 2010 on Android (Lync 2010)

How to configure Lync 2010 on Android (Lync 2010)

http://plexhosted.com/billing/knowledgebase/230/How-to-configure-Lync-2010-on-Android-Lync-2010.html

• Synopsis

  This guide will show you how to configure Lync 2010 on Android.

• Applicable to

  All hosted Lync 2010 accounts.

• Prerequisite

  • a hosted Lync 2010 account
  • Lync 2010 Mobile Client

• How to

1. Run your Lync 2010 Mobile Client.

2. Enter your credentials - e-mail and password.

3. Click on the Options and choose Server Settings.

4. Turn off Auto Detect Server option and setup servers manually using the following urls:
   External Discovery Address:
   https://autodiscover.lync.plexhosted.com
   Internal Discovery Address:
   https://autodiscover.lync.plexhosted.com

5. Return to the main page, enter your password again. Click Sign In button and you would be able to see signing in screen.

6. When you sign in to the Lync mobile client you can see configuration screen. Click on the button Next.

7. You will see your phone number, click on the button Next.

8. Click the button Done to finish configuration.

9. You can see the screen with your information.

10. To change your status click on the status section under your username.

11. To start chatting click on the contact you want to chat and choose Send an IM icon. Then you can type your message and click the button Send.

12. You can see and manage your conversations using the tab Chats.

the delegates settings were not saved correctly. cannot activate send-on-behalf-of list

http://support.microsoft.com/kb/2593557
One of my customers came to me with the following issue and asked if there were “better” solutions available than they found using their own Internet research. They use a mix of Outlook 2007 and Outlook 2010 clients and a lot of shared mailboxes. The access to these mailboxes is granted through group memberships, which have “full mailbox access” and “send-as” permissions granted.  Outlook is configured to use a second profile for the Shared Mailbox access.

The Symptom:

In the phase of testing their mailbox migration to Exchange 2010 Sp1 RU6 they encountered the following issue trying to delegate Calendar permissions using the “Outlook delegation wizard” on their shared mailboxes:


“The Delegates settings were not saved correctly. Cannot activate send-on-behalf-of-list. You do not have sufficient permission to perform this operation on this object”

Troubleshooting steps:

If you do an Internet research there appear to lots of people complaining about this exact behaviour. The two most popular described solutions are the following:
1. Using the “IgnoreSOBError” – “SendOnBehalf” Registry key to silently drop the error message and proceed with permission assignment. With the usage of this key the described error message is just dropped by Outlook and the selected permissions out of the delegation wizard are applied (without setting the SendOnBehalfof permission).
The SendOnBehalf Permission is not needed to act as calendar delegate. If the delegate has to use the “send on behalf of” permission for writing email “in behalf of” this has to be done by an administrator using the Exchange Management Shell or Exchange Management Console.
Outlook 2007 Registry key:
HKCU\Software\Microsoft\Office\12.0\Outlook\Preferences or
HKCU\Software\Policies\Microsoft\Office\12.0\Outlook\Preferences
Dword: IgnoreSOBError value = 1
Outlook 2010 Registry key:
HKCU\Software\Microsoft\Office\14.0\Outlook\Preferences or
HKCU\Software\Policies\Microsoft\Office\14.0\Outlook\Preferences
Dword: IgnoreSOBError value = 1
2. Create a new RBAC role and strip all parameters for “GrantSendOnBehalf plus Identity” and add the user who should be able to do their delegation without an error. In this case the Outlook Wizard will finish successfully and the delegate will be added to the list of “publicDelegates”.
The downside of this solution about using this “Organization wide” RBAC role is that the user is now able (using remote PowerShell) to “GrantSendOnBehalf” in every mailbox, not only his delegated mailboxes.

http://blogs.technet.com/b/mspfe/archive/2012/06/26/solving_2d00_the_2d00_delegates_2d00_settings_2d00_were_2d00_not_2d00_saved_2d00_correctly_2d00_error_2d00_on_2d00_exchange_2d00_2010.aspx